DescriptionSpecsStandard FeaturesOptionsRequest Quote

These reach stacker lift trucks are designed for indoor use and ideally suited for a wide variety of applications such as dock operations, general warehouse and storage, home improvement warehouses, and paint and chemical distribution. Whether your material handling jobs include unloading or loading trailers, dockside maneuvering, or stocking, the Hyster walkie reach stacker line of motorized pallet trucks gives you big capacity and productivity with the operational cost of a walkie rather than a rider. And our superior ergonomics along with the versatility of user selectable performance modes will help to increase your productivity. The creep or “turtle” speed button, located conveniently on the bottom-side of the handle allows you to maneuver the ZR-reach stacker series in and out of tight areas, with the steer handle in the upright position. Bottom mounted steering control handle’s ergonomic, easy-to operate, finger tip control of proportional lift/ lower, reach extension/retraction (W20-30ZR only), travel speed and direction, and an optional sideshift makes load handling easier and more precise, increasing your productivity. The Hyster® Walkie Stacker product line’s advantageous head-length and multi-function, bottom mounted steering control handle gives you incredible load handling control with excellent maneuverability. The three operator selectable performance modes allow you to choose between three preset user configurations that affect acceleration, deceleration (neutral braking), and top travel speed. Truck diagnostic information can be read using a hand-held programming tool (optional) or by checking the status of the LED indicator mounted on the controller. And all wiring is tagged for quick, easy circuit tracing. The heavy-duty walkie stacker series features a tough, unitized construction that is robotically welded, for superior reliability. Serial communications and solid state switches with soldered wire connections increasing reliability and uptime, replace the hydraulic pump contactor, forward and reverse contactors and their corresponding maintenance costs.

W-ZCZAZR Brochure and Tech Guide

  • ManufacturerHyster Company
  • ModelW20ZR
  • Capacity, rated (lb)2,000
  • Load center (in)24
  • Power type24V – Electric
  • Operator typePedestrian
  • Tire typeCushion
  • Wheels1 / 4
  • Lift Height (in)123.0
  • Maximum Carriage Width (in)32.5
  • Forks (in)4.0 / 1.5 / 42.0
  • Fork Spread (in)30
  • Tilt of Mast (deg)3 forward / 4 backward
  • Length to face of forks55.5 (in)
  • Overall Width (in)35
  • Lowered Overall Height (LOH)83 (in)
  • Maximum Fork Height (MFH)123 (in)
  • Turning radius (in)74.2
  • Overhang (in)2.6
  • Stability (Comply with ANSI?) Yes
  • Travel speed (mph)3.5
  • Lift speed (ft/min)30
  • Lowering speed (ft/min)43
  • Gradeability %10
  • Total approximate weight (lb)3,422
  • Axle load (lb)2,286 / 1,736
  • Size of tire (in)10.0 x 5.0
  • Wheelbase (in)64.4
  • Ground clearance (in)0.5
  • Battery typeLead Acid
  • Voltage24
  • Battery weight (lb)600
  • Traction motor2.3 kp (60 minute rating)
  • Pump motor,4 kp (5 minute rating)
  • Traction motor control methodTransistor
  • Number of speedsInfinitely variable
  • Relief pressure for attachments2900 PSI
  • Grade Clearance %13

Complete truck has:

  • 2-stage limited free-lift VISTA mast with maximum fork height of 123″
  • 24.0″ single reach attachment
  • 42″ long forks
  • 24 volt
  • SEM transistor control with integrated transistor hoist control
  • regenerative braking
  • low battery lift interrupt
  • impact resistant, ergonomically designed, bottom mounted control handle with gas spring return
  • conveniently located controls including: butterfly-type accelerator control, and proportional lifting/lowering buttons
  • three user-selectable performance modes
  • direction reversing switch
  • key switch
  • electronic horn
  • battery compartment – 33.0″ x 13.5″
  • electromagnetic park brake with service override
  • polyurethane drive tire10″ x 5″
  • tandem load wheels – 4.0″ x 2.8″
  • 3 degree forward, 4degree back,fork tilt
  • knock-out load wheel axles
  • wire mesh mast screen
  • 35″ open end clearance
  • static discharge strap
  • standard construction
  • operator manual
  • ULClassificationE.


  • Cold storage/freezer construction
  • battery rollers (N/A W25-30ZA2)
  • battery discharge indicator with hour meter and fault light
  • 37″ – 49″ open end clearance base arm width
  • Lexan mast shield
  • slow speed accessory button
  • parts manual (printed or CD)
  • toggle ignition switch
  • 3-stage full free lift VISTA mast
  • backup alarm kit
  • strobe light kit
  • convenience tray (fits 13.5″ battery box)
  • sideshift